| BERLET ELECTRONICS LTD. Company Profile | |||
|---|---|---|---|
| Company Name | Berlet Electronics Ltd. | ||
| Establishment Number | 234567059718 | ||
| Website | Visit Berlet Electronics Ltd. Website | ||
| Phone | 905-564-2710 | ||
| Established Year | - | ||
| Province | Ontario | ||
| Address | 6-1715 Meyerside Dr MISSISSAUGA,Ontario L5T 1C5 |
||
| Business Activity | Manufacturer / Processor / Producer | ||
| Conatct Person | Patricia Blanchard (Manager) | ||
| Phone Number | 905-564-2710 | ||
| Fax Number | 905-564-2755 | ||
| Country of Ownership | Canada | ||
| Berlet Electronics Ltd. Company Services | |
|---|---|
| Service | Service Description |
| Engineered Radio Remote-Control Systems | SERIES 18K RADIO REMOTE CONTROL ENGINEERED SYSTEMS Series 18K system features the custom engineering of the Telemotive 8K Series system coupled with the modular design of the 10K Series. This innovative modular design is a new departure from existing engineered systems in that it offers the choice of licensed (IC Part C) or non-licensed (IC Part K) transmitter on the same basic modular platform. The standard transmitter for the 18K system is our new JLTX (joystick/lever style) transmitter that features a rugged polymer housing that can be equipped with joystick or lever controls. The 18K can be configured for combinations of stepped or stepless control and can be constructed to provide up to 64 programmable outputs. The 18K uses time multiple sharing (TMS) that allows at least four transmitters to operate on the same radio frequency. New surface-mount receivers and redesigned modular logic and output boards provide higher reliability and make the 18K easy to configure and maintain Features include: Flash memory microprocessor Frequency bands: 41 to 470 MHz Regulatory: Non-licensed, IC Part K; Licensed IC Part C Transmitter: TMS (Time Multiple Sharing) Only a single receiver is required for the following options: Pitch and Catch Operation Multibox operation Stepped or stepless operation |
| Off-The-Shelf Radio Remote Control Systems | Its easy to see why our Telemotive Series 10-K is a real made- in-Canada winner. It is the first and only Canadian pendant-style radio transmitter with positive-detent pushbuttons for up to three speeds. The 10-K is an off-the-shelf system, providing a practical, low- cost solution for the remote control of cranes, hoists and monorails. One lightweight (1.1 kg/2.5 lb) transmitter can control up to seven motion functions on one system. As well, up to four systems may function on the same time-shared frequency. New technology incorporates multi-box crane controls. The 10-K offers 5 choices of transmitter styles: a hand-held 1,2 0r 3-speed positive-detent pushbutton pendant-style transmitter; a hand-held 1-speed toggle or 1-speed membrane-style transmitter; a hand-held 1, 2-speed tactile membrane-style transmitter; and a Belly Box 2,3 or 5-speed lever (JLTX) or (SLTX) style transmitter. All allow customized engineering with the flip of a switch. All allow customized engineering with the flip of a switch. All offer a choice of disposable or rechargeable battery packs. We can supply a complete 10-K radio-remote control system within one week from our Mississauga, Ontario plant. You can make the transition from old-style cable-connected pendant to state-of- the art radio transmitter in minutes. In Canada it is radio license exempt. Features include: - TMS technology - Modular construction allow quick module changes for immediate repair - Diagnostics for transmitter and receiver - Transmitter Positive LED feedback of battery condition and verification of RF output - Receiver Microcomputer board and output LEDs allow visual verification of each module - License-exempt status by Industry Canada Options for the 10-K series include Controlled Range Plus, which provides a circle of safety, and a high-quality Waist Support Belt for Transmitters. |
| Laser-Guard Anti-Collision Devices | 14-K SERIES ANTI-COLLISION SYSTEM FOR OVERHEAD CRANES & OTHER GUIDED MATERIAL HANDLING EQUIPMENT Laser-Guard is an advanced laser-based system that offers distance control and collision prevention for cranes or other guided machinery. It consists of a Class 1 laser transmitter/receiver, special universal mount and a reflective target. A typical application would be to mount the laser transmitter/receiver on the bridge of a crane and mount the target on the structure to be avoided. Laser-Guard will sense and measure the distance of a crane moving at up to 800 fpm, slowing it in one, two or three user- adjustable stages (to eliminate load swing), and bringing it to a halt. It is self-monitoring and includes contacts for alarms or shutdown. Safe and economical, Laser-Guard cannot be jammed by RF interference, unlike radar or other radio-based anti-collision systems System features include: - Safe Class 1 Laser Rating - Range: 5 to 150 feet - Self-monitoring with Fault Output - Accuracy: ± 10% of range measured - Easy-To-Install Reflective Target - Built-In Aiming Indicator - Rugged Mounting Assembly Laser Anti-Collision Specifications - Power requirements: 120/240 vAC, 47-60 Hz, 180-260vDC, 10-12 vDC, special voltages on request. - Range 5-150 feet with 3 independently adjustable outputs or set points: 5 - 40 ft, 40 - 70 ft, 50 - 100 ft. An optional relay interface panel provides a timed bypass on activation of the third set point, allowing operation close to a wall or another crane. Each set point may be adjusted within its range, with an accuracy of ± 10%. - Temperature: -30 to 70 degrees C - Outputs: Standard single pole, normally open or normally closed relays are used. Contact rating is 5 amps, 110 vAC, 60 Hz resistive. Note: If any contactors to be controlled by this device exceed this rating, interposing relays must be installed - Optional Interface Panels: Additional interface panels are available for 480 vAC and 250 vDC. - Enclosure: Standard system enclosure is NEMA 12; other enclosures available on request. - Laser: Class 1 Laser-Guard has evolved from TELTEC, the unique medium-range anti-collision system in use since 1976. TELTEC is widely used throughout the world on cab, pendant and radio-operated cranes to prevent collisions over a range of 10 to 100 feet. Users in a wide variety of industries have already improved employee safety, reduced product liability, and avoided damage to machinery. In the same way that TELTEC has shown itself to be low-cost insurance, Laser Guard will continue to safeguard valuable equipment even more effectively. |
| Wireless Telemetry Control | WIRELESS TELEMETRY CONTROL WITH THE 12-K SERIES INSTACON 12-K is a two-way digital radio telemetry control system that replaces wired control systems. It provides confirmation, via a wireless link, that a requested function has been done. Wire links, which are costly to maintain, are replaced by INSTACON 12-K, to increase operator and machine efficiency and safety. A typical INSTACON 12-K system consists of two or more transceivers. One transceiver controls the functions of a machine via a digital radio link. Once the requested function is done, the second transceiver radios back a confirmation to the operator. Here are the highlights: - Microprocessor-Controlled Receivers - Time Multiple Sharing (TMS) - Replaces Wire Links - Reduces Installation & Maintenance Costs - VHF Band Operation - Easy Interface to Controlled Machine - Provides Positive Function Indication - Multiple Units May Be Combined INSTACON 12-K applications include mobile side loaders and straddle cranes that handle intermodal freight containers in railroad yards and marine terminals. Before, control of the spreader bar was via a wired line, which spooled off a reel as the container moved. This spooling action could cause many failures due to constant movement in a harsh environment. INSTACON 12-K replaces these wire-control links, reducing installation costs and improving reliability while providing a positive measure of control even when the operator is unsighted from the machine function. Other applications include: remote control of valves in irrigation systems, oil and gas pipelines and refineries; and control of conveyors, bucket loaders, and hopper loaders in quarry, mine and grain processing operations. |
| Remote Air/Hydraulic Bridge Brake Conversion Kit | REMOTE AIR/HYDRAULIC BRIDGE BRAKE CONVERSION KIT The Telemotive RC-EAH-1 AC and DC Air/Hydraulic Bridge Brake Conversion Kit makes it possible to operate a hydraulic foot pedal type of bridge brake remotely by radio or pendant. This type of control, similar to automotive braking, is generally acknowledged to offer more sensitive bridge braking than does an electric bridge brake. Automatic braking for the bridge motion of an overhead traveling crane becomes essential when converting a crane from cab operation to radio remote control or pendant. Without automatic braking, a loss of power would allow the crane to coast to a stop, proving hazardous in certain conditions. Implementing the Telemotive remote bridge brake conversion kit from Berlet will provide the same braking capability from the floor as is available from the cab. Our remotely controlled air/hydraulic brake package will interface with any existing hydraulic brake system when converting any Electric Overhead Traveling crane to radio remote or pendant control. The Telemotive remote controlled brake system features an automatic service brake mode which is controlled by bridge movement and a power-off emergency brake mode. Either the service brake or emergency brake can also be controlled by operator command if required. Both control modes are field adjustable for optimum brake operation on the crane. Brake pressures are constant after initial startup and installation. The only other adjustment is monitoring proper brake shoe adjustments. Telemotive also offers two alternate control mechanisms. First, by adding a third solenoid, 3-step radio controlled braking is available. Second, by replacing the service brake solenoid with a proportional transducer, radio-controlled proportional braking of the crane is available. Any existing manual hydraulic brake system can easily be converted to the Telemotive remote-controlled brake package by installing the pre-engineered and pre-assembled control panel and compressor assembly on the crane bridge and interconnecting the necessary additional hydraulic tubing and electrical wiring. The remote-controlled system must also have a brake fluid bleeder/reservoir. If this bleeder/reservoir is not used with the existing manual brake system, it must be included as part of the new remote control package. If the crane you are considering converting to radio remote control has a hydraulic brake, regardless of manufacturer, you can confidently rely on Berlets experienced engineers to assist you ... and at a cost far less than anywhere else in the marketplace. |
| Berlet Electronics Ltd. Company Business Activity | |
|---|---|
| Activity ID | Activity |
| 333990 | All Other General-Purpose Machinery Manufacturing |
Problem with this data ?
Click here