Datrend Systems Inc. Located at 130-4020 Viking Way, RICHMOND,British Columbia, V6V 2L4, , Richmond, British Columbia. .

Searching for a company in Canada ?

Find all the information about a company you are looking for!

Datrend Systems Inc.

About Datrend Systems Inc.

Datrend Systems Inc. was established in year 1991

Datrend Systems Inc. registered place of business address in record is: 130-4020 Viking Way, RICHMOND,British Columbia, V6V 2L4, , Richmond - V6V 2L4, British Columbia

DATREND SYSTEMS INC. Company Profile
Company Name Datrend Systems Inc.
Establishment Number 234567020078
Website Visit Datrend Systems Inc. Website
Phone 604-291-7747
Established Year 1991
Province British Columbia
Address 130-4020 Viking Way, RICHMOND,British Columbia, V6V 2L4, , Richmond - V6V 2L4, British Columbia, Canada
Business Activity Manufacturer / Processor / Producer
Conatct Person Jon Strong (General Manager)
Phone Number 604-291-7747
Fax Number 604-294-2355
Country of Ownership Canada
Datrend Systems Inc. Company Services
ServiceService Description
Sensitest SpO2 Sensor TesterSensitest provides tests for all types of SpO2 probes in the biomedical and clinical environment. This compact devices draws power for two modes of testing from a single 9V Alkaline Battery
Infutest 2000 Infusion Pump AnalyzerSimultaneously inspect up to four single channel IV pumps or four independent channels of a multi-channel device in just seconds with our Infutest 2000 Series E and optional RSM. Better than 1% accuracy on all pumps, including Baxter Colleague and Alaris® Signature. Conduct the full range of flow, pressure, volume and interval tests on practically any fluid delivery system including single rate, dual rate and patient controlled analgesia (PCA) devices. These tests are performed following easy-to-use manual or autosequence formats using the front panel keypad and graphical display.
Oxitest Plus 7 Pulse Oximeter TesterThe versatile, handheld Oxitest Plus7 provides the most advanced technology available in the market today for verifying the proper operation and performance of pulse oximeter monitors and modules throughout the clinical environment. The Oxitest Plus 7 has an exclusive Nellcor-Puritan Bennett sensor port, which was developed in cooperation with Nellcor®. This Industry-exclusive feature allows correct selection of the instrument's simulation output to the specific R-Cal value of the attached Nellcor® probe
Infutest Solo Infusion Pump AnalyzerInfutest Solo meets the needs of customers who desire a highly accurate infusion device analyzer capable of a measuring infusion device output flow patterns, including pulsatile flows, but can manage their work load with a cost-effective single-channel analyzer.
20A ECG/Arrhythmia SimulatorCompact and lightweight, our ECG and Arrhythmia simulator is designed to fit your needs, tool case and budget! Use this simulators to test your patient monitors, telemetry systems and anywhere a quick ECG or Arrhythmia simulation is needed. The versatile 6-lead configuration provides an additional pre-cordial lead and allows you to check reference leads without the need for a full 12-lead layout.
ES601 Plus Automated Electrical Safety AnalyzerES601 Plus Automated Electrical Safety Analyzer. Automated & Manual Electrical Safety Testing per AAMI/ANSI ES-1, IEC 60601 and IEC 62353, and VDE 751 standards
Phase 3 Defibrillator and Trancutaneous Pacer AnalyzerPhase 3 is the first Defibrillator/Pacer Analyzer specifically designed to test Pulsed Multiphasic defibrillators. Test Monophasic, Biphasic and Pulsed Multiphasic Defibrillators, AEDs and Transcutaneous Pacers with better than 1% accuracy on either line or battery power. Battery provides up to 24 hours or continuous operation and detachable paddle plate provides easy hands-free testing.
VLM - Variable Load ModuleAccessory product to Phase 3. Variable Load Module allows testing defibrillators at maximum energy with selectable loads from 25 to 175 ohms in accordance with AAMI DF-80 and IEC 60601-2-4.
AMPS-1 Advanced Modular Patient SimulatorThis compact Simulator packs a lot of punch in a small package. At only 7” X 4” X 1.25 inches, AMPS-1 fits comfortably in your hands and all leads and cables are conveniently fed from the top and bottom ends. Operate from the single 9 volt alkaline battery or with the optional battery eliminator. The unique modular design of AMPS-1 allows you to get just what you need as you need it. Upgrading and adding modules is easily accomplished by you at your facility. No need to send it to a repair facility just to add features
IncuTestDatrend Systems Inc. introduces Incutest, the first infant incubator and infant radiant warmer testing system meeting the requirements of the IEC Standards for incubators (IEC 60601-2-19) and radiant warmers (IEC 60601-2-21). With Incutest’s unique wireless display and control capabilities, sensing can be done in the infant incubator or infant radiant warmer device under test. Results are viewed externally in real-time on the color graphics display. For added convenience, changes to the test protocol can be made without disturbing the heating environment.
MPS-2The MPS-2, a multiparameter simulator, may be the best value you can find in a dual-channel invasive blood pressure simulator on today’s market. This “little brother” to our unique AMPS-1, a modular multiparameter simulator, comes in an even smaller package than the AMPS-1 and offers many similar features and capabilities in a fixed function, non-modular platform. At just 5.5" x 3.6" x 1.3" and weighing in at only 11.5 ounces, the MPS-2 is a feature-packed multiparameter simulator in one of the smallest and lightest weight physical packages available. It’s smaller, lighter, and more cost effective than any other similarly-featured multiparameter simulator on today’s market
vPad-ESThe vPad series of electrical safety testing devices combines an Android tablet (wired or wireless) with a measurement platform to create a revolutionary test system. The measurement platform provides the normal assortment of electrical measurements (voltage, current and resistance) of the commonly used medical Electrical Safety Standards. Automated and Manual Electrical Safety Testing per AAMI/ANSI ES-1 and IEC 60601 standards
vPad-353The vPad series of electrical safety testing devices combines an Android tablet (wired or wireless) with a measurement platform to create a revolutionary test system. The measurement platform provides the normal assortment of electrical measurements (voltage, current and resistance) of the commonly used medical Electrical Safety Standards (IEC 62353, AS 3551, AAMI/ANSI ES-1 and IEC 60601 standards)
FMS-3 Fetal / Maternal SimulatorAt just 5.5” x 3.6” x 1.3” and weighing in at only 11.5 ounces, the FMS-3 is a feature-packed Fetal/Maternal simulator in one of the smallest and lightest weight physical packages available. It’s smaller, lighter and more cost effective than any other similarly-featured Fetal/Maternal simulator on today’s market. The FMS-3 Fetal/Maternal Simulator sets a new standard of performance and value in simulators for fetal monitors. Simply stated, the FMS-3 provides enhanced simulation capabilities, more simulation channels, additional functionality, and full 5-lead Maternal ECG simulation, all at a price that is considerably less than competitive models. Its unique features include three (3) channels of ultrasound simulation for detection and monitoring of “Triplets”.
Datrend Systems Inc. Company Business Activity
Activity IDActivity
334512Measuring, Medical and Controlling Devices Manufacturing
339110Medical Equipment and Supplies Manufacturing

Problem with this data ?

Click here
2018 © CorporateDir.com